hey guys, todd for myxed up here, and today we're going to be showing you a new pipe we have in, the 7pipe. it's kind of a new twisty style blunt. we're going to go ahead in-depth and weâ€™ll show you everything, how to load it, how to unload it and everything in-between. alright guys so today we're going to do the 7pipe. we got ourselves a little bit of stuff here and we're going to load up. when you first open it up it says â€œstoner tested, geek approved, glass blunt nirvana.â€ it looks pretty nice, comes apart here. slides apart these o-rings to keep everything together. as you can see very nice pyrex glass, with a titanium insert here. and what we're going to do is show you what's inside here first. so when you open up your pack you're actually going to get a few different things. thereâ€™s your display on the inside that shows everything that you got. so youâ€™ll have a twisty blunt with your silicone caps and some extra o-rings plus your nano cleaning brush, and i'll show you all that inside this package here.
you get a nice little carrying kit here, a little case. and then this little pack here. this has two silicon ends plus your nano cleaning brush. and there's your nano cleaning brush there. quite small. letâ€™s set that aside. you have an extra o-ring here for what i showed you earlier. and then your two silicone caps, one for each side. and they slide on and off pretty nicely. weâ€™ll go ahead and put one on this end here and weâ€™re gonna show you how we load this guy. so we'll take our glass pipe here and weâ€™re basically just going to fill up the end. itâ€™s pretty easy to do. you can probably use a cone filler to do the same thing. you will load it pretty much all the way down the glass tube, depending on how you want. what's nice is you can just twist the tube, so if you just want to do a half one you can twist it to the end and it will fill up just fine. all right and once you have enough inside of there, weâ€™re gonna go ahead and take this guy and push it right down.
we're gonna go ahead and twist it the way of the spiral, so as you can see as we twist, weâ€™re pushing it in and it will cut in and move all the way down the blunt. you might have to go back and forth a little bit from time to time just to help grab a little bit more. and that'll twist all the way down. so as we twist it down, we're grabbing a little bit more each time, just to help you get a nice pack in there. and i tend to like to do it this way, it tends to pack a little bit better. and once we get all the way to the bottom, you can see the o-ring will slide in. and then you're pretty much nice and packed in there. when you go to smoke you're just going to go ahead and pull off the end here. which is good for if youâ€™re taking it with you. and then youâ€™ve got your end there, and so, youâ€™ll just light this end and as you puff through the other end, it's got all the nice little holes here. and that's actually where your nano brush comes in. this guyâ€™s actually designed to clean out all these little holes over time because youâ€™ll get a little bit of resin in them.
so as you smoke on it and pull on it, you're going to go ahead and twist it the opposite direction needed to fill it. and as you can see it's just going to push out your ash as you go. pretty convenient. itâ€™ll push it all the way down as you smoke it out. and then as you twist it all the way to the end, it'll push everything out the end. so fairly convenient. really easy to clean. i mean itâ€™s just this one tube. so definitely come by the shop and see if you can get yourself one of these guys. itâ€™s 7pipe. so i hope you guys enjoyed this one. thanks for watching.